I am Reza Arabshahi Delouei, holding a Master's Degree in Territorial, Urban, Environmental, and Landscape Planning from the Polytechnic of Turin. My academic background and professional journey have equipped me with a comprehensive understanding of urban planning and architecture, allowing me to tackle complex urban challenges with innovative and practical solutions. Over the years, I have developed strong skills in project management, stakeholder engagement, and spatial analysis, which have been crucial in my various roles ranging from internships to urban planning positions. I am proficient with a wide range of technical tools including AutoCAD, SketchUp, GIS/QGIS, CityEngine, Twinmotion, and Adobe Illustrator. I thrive in multidisciplinary environments and am driven by a proactive approach to problem-solving coupled with effective communication and teamwork. I am eager to apply my knowledge and skills to new challenges and contribute meaningfully to sustainable development in the built environment.

Reza Arabshahi Delouei

I am Reza Arabshahi Delouei, holding a Master's Degree in Territorial, Urban, Environmental, and Landscape Planning from the Polytechnic of Turin. My academic background and professional journey have equipped me with a comprehensive understanding of urban planning and architecture, allowing me to tackle complex urban challenges with innovative and practical solutions. Over the years, I have developed strong skills in project management, stakeholder engagement, and spatial analysis, which have been crucial in my various roles ranging from internships to urban planning positions. I am proficient with a wide range of technical tools including AutoCAD, SketchUp, GIS/QGIS, CityEngine, Twinmotion, and Adobe Illustrator. I thrive in multidisciplinary environments and am driven by a proactive approach to problem-solving coupled with effective communication and teamwork. I am eager to apply my knowledge and skills to new challenges and contribute meaningfully to sustainable development in the built environment.

Available to hire

I am Reza Arabshahi Delouei, holding a Master’s Degree in Territorial, Urban, Environmental, and Landscape Planning from the Polytechnic of Turin. My academic background and professional journey have equipped me with a comprehensive understanding of urban planning and architecture, allowing me to tackle complex urban challenges with innovative and practical solutions. Over the years, I have developed strong skills in project management, stakeholder engagement, and spatial analysis, which have been crucial in my various roles ranging from internships to urban planning positions.

I am proficient with a wide range of technical tools including AutoCAD, SketchUp, GIS/QGIS, CityEngine, Twinmotion, and Adobe Illustrator. I thrive in multidisciplinary environments and am driven by a proactive approach to problem-solving coupled with effective communication and teamwork. I am eager to apply my knowledge and skills to new challenges and contribute meaningfully to sustainable development in the built environment.

See more

Language

English
Fluent
Italian
Advanced
Persian
Fluent

Work Experience

Urban Planner and Designer Intern at Comune di Torino
March 31, 2025 - July 16, 2025
Updating and reviewing the soft mobility database, updating Torino in Bici website focusing on cycling mobility topics, pedestrian areas, 30 km/h zones, feasibility studies for cycle paths, 30 km/h neighborhoods, and school zones. Collaboration in 2D and 3D design using AutoCAD, SketchUp, and Twinmotion. Responsibilities also included verification of databases, data acquisition, cross-referencing, site visits during execution of ongoing works, and preparation of presentation documents and project communication. Achievements include improvement of 2D and 3D design skills, project design development, teamwork, graphic analysis, and documentation.
Architecture/Engineering Designer Intern at Studio Tecnico Spada
August 31, 2024 - July 16, 2025
Development of surveys, drafting reports, architectural and structural design support using AutoCAD and QGIS. Responsibilities included use of AutoCAD 2D, knowledge of 3D architectural modeling programs, Office package, and Adobe. Achievements include principles of graphic designs, large scale designs, and improvement of graphic presentation.
Architect Intern at Siciliamia Cultura APS
September 30, 2022 - July 16, 2025
Renovating buildings and improving their quality using AutoCAD and SketchUp, managing the interior design team, and project documentation. Required team management, project documentation, and planning time predictions. Achievements include enhancing 3D design, improvement of interior designs, and advancing the project as a team.
Urban Planner Intern at Municipality of Mashhad
December 31, 2018 - July 16, 2025
Rehabilitating dilapidated urban structures using AutoCAD and GIS. Requirements included analytical skills, familiarity with urban structures, and spatial analysis. Achievements included improving quality of life for residents through interviews with more than 50 residents and 10 stakeholders.
Part-Time Urban Planner at Rasam Company
June 30, 2016 - July 16, 2025
Investigated compatibility of Mashhad metro lines 1 & 2 using AutoCAD and GIS, evaluated economic compatibility and urban tissue of commercial centers using ArcGIS products and AutoCAD, planned temporary investment packages for Mashhad municipality aimed at the private sector, conducted 300 questionnaires, and performed data analysis through interviews with 10 experts. Required analytical skills, teamwork, availability for site visits, and data analysis. Achievements include investigations on economic compatibility and investments throughout the city.
Urban Planner and Designer Intern at Comune di Torino
March 31, 2025 - July 31, 2025
Updated and reviewed the soft mobility database, maintained the Torino in Bici website focusing on cycling mobility, pedestrian areas, 30 km/h zones, and feasibility studies for cycle paths and school zones. Collaborated in 2D and 3D design using AutoCAD, SketchUp, and Twinmotion. Conducted data verification, acquisition, site visits, and prepared presentation documents to communicate project progress. Improved 2D/3D design skills, teamwork, graphic analysis, and documentation.
Architecture/Engineering Designer Intern at Studio Tecnico Spada
August 31, 2024 - July 31, 2025
Performed surveys, drafted reports, and supported architectural and structural design using AutoCAD and QGIS. Gained principles of graphic designs, large-scale designs, and improved graphic presentations.
Architect Intern at Siciliamia Cultura APS
September 30, 2022 - July 31, 2025
Renovated buildings and improved quality using AutoCAD and SketchUp, managed the interior design team, and maintained project documentation. Enhanced 3D design, interior design, and team project advancement.
Urban Planner Intern at Municipality of Mashhad
December 31, 2018 - July 31, 2025
Rehabilitated dilapidated urban structures using AutoCAD and GIS. Improved residents' quality of life through interviews with over 50 neighborhood residents and 10 stakeholders.
Part-Time Urban Planner at Rasam Company
June 30, 2016 - July 31, 2025
Investigated compatibility of Mashhad metro lines using AutoCAD and GIS, assessed economic compatibility and urban fabric of commercial centers using ArcGIS and AutoCAD. Planned temporary investment packages for the private sector, conducted 300 questionnaires and interviewed 10 experts related to projects. Delivered insights on economic compatibility and city investments.
Urban Planner and Designer Intern at Comune di Torino
March 31, 2025 - September 5, 2025
Updated and reviewed the soft mobility database. Worked on the Torino in Bici website related to cycling mobility, pedestrian areas, and 30 km/h zones. Conducted feasibility studies for cycle paths, 30 km/h neighborhoods, and school zones. Collaborated in 2D and 3D design using AutoCAD, SketchUp, and Twinmotion. Duties included verification of databases, data acquisition, cross-referencing design, site visits during ongoing works, and the preparation of presentation documents and project communication. Achievements include improved 2D and 3D design skills, development of project design, teamwork, graphic analysis, and documentation.
Architecture/Engineering Designer Intern at Studio Tecnico Spada
August 31, 2024 - September 5, 2025
Developed surveys, drafted reports, and supported architectural and structural design using AutoCAD and QGIS. Gained principles of graphic design, large scale designs, and improved graphic presentation.
Architect Intern at Siciliamia Cultura APS
September 30, 2022 - September 5, 2025
Renovated buildings and improved their quality using AutoCAD and SketchUp. Managed the interior design team and handled project documentation. Enhanced 3D design and interior designs while advancing the project collaboratively.
Urban Planner Intern at Municipality of Mashhad
December 31, 2018 - September 5, 2025
Rehabilitated dilapidated urban structures using AutoCAD and GIS. Applied analytical skills and spatial analysis with familiarity in urban structures. Conducted interviews with over 50 residents and 10 stakeholders to improve residents' quality of life.
Part-Time Urban Planner at Rasam Company
June 30, 2016 - September 5, 2025
Investigated compatibility of Mashhad metro lines 1 & 2 using AutoCAD and GIS. Evaluated economic compatibility and urban tissue of commercial centers using ArcGIS and AutoCAD. Planned temporary investment packages for Mashhad municipality’s private sector. Conducted 300 questionnaires and data analysis through interviews with 10 experts. Analyzed economic compatibility and investments across the city.
Urban Planner and Designer Intern at Comune di Torino
March 1, 2025 - September 5, 2025
Responsible for updating and reviewing the soft mobility database and Torino in Bici website concerning cycling mobility, pedestrian areas, and 30 km/h zones. Conducted feasibility studies for cycle paths and school zones. Collaborated in 2D and 3D design using AutoCAD, SketchUp, and Twinmotion. Verified databases, acquired and cross-referenced data, conducted site visits during ongoing work execution, and prepared presentation documents and project communication. Developed skills in 2D/3D design, project design, teamwork, graphic analysis, and documentation.
Architecture/Engineering Designer Intern at Studio Tecnico Spada
August 1, 2024 - September 5, 2025
Developed surveys, drafted reports, and supported architectural and structural design using AutoCAD and QGIS. Gained principles of graphic design, experience in large scale designs, and improvement of graphic presentations.
Architect Intern at Siciliamia Cultura APS
September 1, 2022 - September 5, 2025
Renovated buildings and improved their quality using AutoCAD and SketchUp. Managed the interior design team and handled project documentation and planning time predictions. Enhanced 3D design, interior design capabilities, and advanced project progression as part of a team.
Urban Planner Intern at Municipality of Mashhad
December 1, 2018 - September 5, 2025
Rehabilitated dilapidated urban structures using AutoCAD and GIS. Applied analytical skills and familiarity with urban structures and spatial analysis. Improved quality of life for residents via interviews with over 50 neighborhood residents and 10 stakeholders.
Part-Time Urban Planner at Rasam Company
June 1, 2016 - September 5, 2025
Investigated the compatibility of Mashhad metro lines 1 & 2 using AutoCAD and GIS. Evaluated economic compatibility and urban tissue of commercial centers using ArcGIS and AutoCAD. Planned temporary investment packages for Mashhad municipality’s private sector. Conducted 300 questionnaires and data analysis interviewing 10 experts. Developed strong analytical skills, teamwork, and site visit capabilities.
Urban Planner and Designer Intern at Comune di Torino
March 1, 2025 - September 5, 2025
Updated and reviewed the soft mobility database and the Torino in Bici website focusing on cycling mobility. Conducted feasibility studies for cycle paths, pedestrian areas, and 30 km/h zones including neighborhoods and school zones. Collaborated on 2D and 3D design tasks using AutoCAD, SketchUp, and Twinmotion. Verified databases, conducted data acquisition and cross-referencing, performed site visits during ongoing works, and prepared presentation documents and project communication. Developed skills in project design, teamwork, graphic analysis, and documentation.
Architecture/Engineering Designer Intern at Studio Tecnico Spada
August 31, 2024 - September 5, 2025
Conducted development surveys and drafted reports while supporting architectural and structural design using AutoCAD and QGIS. Gained experience in graphic design principles and large scale design, enhancing skills in graphic presentation.
Architect Intern at Siciliamia Cultura APS
September 30, 2022 - September 5, 2025
Worked on building renovations and improving building quality using AutoCAD and SketchUp. Managed an interior design team and coordinated project documentation and planning time predictions. Enhanced 3D and interior design skills while contributing to team-driven project progress.
Urban Planner Intern at Municipality of Mashhad
December 31, 2018 - September 5, 2025
Participated in rehabilitation of dilapidated urban structures using AutoCAD and GIS. Applied analytical skills in urban structure assessment and spatial analysis. Conducted interviews with over 50 neighborhood residents and 10 stakeholders aiming to improve residents' quality of life.
Part-Time Urban Planner at Rasam Company
June 1, 2016 - September 5, 2025
Investigated compatibility of Mashhad metro lines 1&2 through AutoCAD and GIS, evaluated economic compatibility and urban tissue of commercial centers using ArcGIS and AutoCAD. Planned temporary investment packages for Mashhad municipality's private sector, conducted 300 questionnaires, and interviewed 10 related experts. Focused on economic compatibility and investment opportunities throughout the city.

Education

Master's Degree at Polytechnic of Turin
January 1, 2020 - December 31, 2023
Bachelor's Degree at University of Bojnord
January 1, 2012 - December 31, 2016
Master's Degree at Politecnico di Torino
January 1, 2020 - December 31, 2023
Bachelor’s Degree at University of Bojnord
January 1, 2012 - December 31, 2016
Master's Degree in Territorial, Urban, Environmental, and Landscape Planning at Politecnico di Torino
January 1, 2020 - January 1, 2023
Bachelor's Degree in Urban Planning at University of Bojnord
January 1, 2012 - January 1, 2016
Master's Degree in Territorial, Urban, Environmental, and Landscape Planning at Politecnico di Torino
January 1, 2020 - January 1, 2023
Bachelor’s Degree in Urban Planning at University of Bojnord
January 1, 2012 - January 1, 2016
Master's Degree in Territorial, Urban, Environmental, and Landscape Planning at Polytechnic of Turin
January 1, 2020 - January 1, 2023
Bachelor’s Degree in Urban Planning at University of Bojnord
January 1, 2012 - January 1, 2016

Qualifications

How to start modelling simple 3D objects – Coursera Project Network
August 1, 2024 - August 31, 2024
Architecture Building from Reference – SketchUp Campus
January 11, 2030 - July 16, 2025
Commercial Interiors – SketchUp Campus
January 11, 2030 - July 16, 2025
SketchUp for Landscape and Site Design – SketchUp Campus
January 11, 2030 - July 16, 2025
AutoCAD; from basic to advance
August 1, 2013 - August 31, 2013
CityEngine+; CityEngine and Twinmotion
January 1, 2024 - January 31, 2024
Revit; from basic to advance
May 1, 2024 - May 31, 2024
Freelancing
August 1, 2024 - August 31, 2024
How to start modelling simple 3D objects – Coursera Project Network
August 1, 2024 - August 31, 2024
Architecture Building from Reference – SketchUp Campus
January 11, 2030 - July 31, 2025
Commercial Interiors – SketchUp Campus
January 11, 2030 - July 31, 2025
SketchUp for Landscape and Site Design – SketchUp Campus
January 11, 2030 - July 31, 2025
AutoCAD; from basic to advance
August 1, 2013 - August 31, 2013
CityEngine+; CityEngine and Twinmotion
January 1, 2024 - January 31, 2024
Revit; from basic to advance
May 1, 2024 - May 31, 2024
Freelancing
August 1, 2024 - August 31, 2024
SketchUp - How to start modelling simple 3D objects – Coursera Project Network
August 1, 2024 - September 5, 2025
Architecture Building from Reference – SketchUp Campus
January 11, 2030 - September 5, 2025
Commercial Interiors – SketchUp Campus
January 11, 2030 - September 5, 2025
SketchUp for Landscape and Site Design – SketchUp Campus
January 11, 2030 - September 5, 2025
AutoCAD; from basic to advance
August 1, 2013 - September 5, 2025
CityEngine +; CityEngine and Twinmotion
January 1, 2024 - September 5, 2025
Revit; from basic to advance
May 1, 2024 - September 5, 2025
Freelancing
August 1, 2024 - September 5, 2025
SketchUp - How to start modelling simple 3D objects
August 1, 2024 - September 5, 2025
Architecture Building from Reference - SketchUp Campus
January 11, 2030 - September 5, 2025
Commercial Interiors - SketchUp Campus
January 11, 2030 - September 5, 2025
SketchUp for Landscape and Site Design - SketchUp Campus
January 11, 2030 - September 5, 2025
AutoCAD; from basic to advance
August 1, 2013 - September 5, 2025
CityEngine +; CityEngine and Twinmotion
January 1, 2024 - September 5, 2025
Revit; from basic to advance
May 1, 2024 - September 5, 2025
Freelancing
August 1, 2024 - September 5, 2025
How to start modelling simple 3D objects – Coursera Project Network
August 1, 2024 - September 5, 2025
Architecture Building from Reference – SketchUp Campus
January 11, 2030 - September 5, 2025
Commercial Interiors – SketchUp Campus
January 11, 2030 - September 5, 2025
SketchUp for Landscape and Site Design – SketchUp Campus
January 11, 2030 - September 5, 2025
AutoCAD; from basic to advance
August 1, 2013 - September 5, 2025
CityEngine +; CityEngine and Twinmotion
January 1, 2024 - September 5, 2025
Revit; from basic to advance
May 1, 2024 - September 5, 2025
Freelancing
August 1, 2024 - September 5, 2025

Industry Experience

Real Estate & Construction, Government, Professional Services, Non-Profit Organization, Education, Other
    uniE621 Extending the Pedestrian Area in Via Monginevro, Turin, Italy
    Transforming Spaces into Vibrant Community Hubs By redesigning the space to prioritize pedestrians and community interaction, this project turns a simple intersection into a welcoming and functional urban square. With features like bike parking, shaded study areas, benches, urban gardens, and improved crossings, the piazza now can be a space where people will want to stop, connect, and enjoy. Through technical precision in AutoCAD and immersive 3D modeling in Twinmotion, I’ve created a vision that balances functionality, sustainability, and aesthetics—showcased in a compelling video that captures the journey from its current state to the final design. https://www.twine.net/signin