Project Manager at Foresight Construction Co., Ltd.

Preparing BOQ, equipment list, proposed key personnel, method statement, health & safety plan on covid19, site organization, mobilized schedule, and construction schedule for bidding all the three project above.

National Inspector at Ministry of Public Work and Transport (MPWT) – Road Asset Management Project II (RAMP-II CW-1,5,6 & 7) (WB/IDA)

In charge of all site quality control for road and bridge construction; road construction: proof rolling, FDT, sampling; bridge construction: soil investigation, RC driven pile, CIP RC pile, reinforcement, formwork and casting; Safety and Environmental Social Safeguard tasks; monthly reporting.

Material Engineer at World Bank IDA Cr.6279-KH – CW-2 (RAMP-II)

In charge of all material sampling and testing in laboratory; calibrate and verify lab equipment; organize and monitor laboratory testing; design asphalt concrete mixing ratio; prepare approved material summary and estimate quantities; monitor testing progress.

Laboratory Engineer at New Phnom Penh International Airport (Techo Takhmao International Airport)

In charge of all material sampling and testing in laboratory; oversee laboratory testing; summarize FAA/ASTM specifications; site inspection (PVD, PHD, inclinometer); prepare material quantity estimates; monitor testing progress.

Material Engineer at Road Asset Management Project II (RAMP-II CW-4)

In charge of all material sampling and testing in laboratory; calibrate lab equipment; organize laboratory team; test types include CBR, Atterberg, Sieve Analysis, Los Angeles, Marshall, etc.; design asphalt concrete mixing ratio; monitor progress.

Site Engineer at Improvement of National Road No.21 (KHM-12 Korean Loan)

Review feasibility studies; identify borrow sources; site quality control for structural works; daily/weekly/monthly reporting.

Project Manager at Foresight Construction Co., Ltd.

Preparing BOQ, equipment list, proposed key personnel, method statement, health & safety plan on covid19, site organization, mobilized schedule, and construction schedule for bidding all the three project above

National Inspector at SBK in association with Renardet S.A.

In charge of all site quality control for road and bridge construction. Road construction: check proof rolling, FDT, sampling material on site, and prepared daily, weekly, and monthly report to NRE. Bridge construction: checked soil investigation (SPT), RC driven pile, CIP RC Pile, reinforcement, formwork and casting concrete, and prepared daily, weekly, and monthly report to NBE. Safety and Environmental Social Safeguard task: prepared monthly check list of environments, and female staff recruitment and gender base, and crash report to NESSE.

Material Engineer at China Railway International Group (CRIG)

In charge of all material sampling and testing in laboratory for using in project. Check, calibrate and verify load of laboratory equipment for operating laboratory. Arrange and monitor laboratory team work for laboratory testing such as CBR, Atterberg Limit, Sieve Analysis, Los Angeles Abrasion, Soundness, Flat and Elongated Particle, Specific Gravity, Sand Equivalent, Penetration, Ductility, Marshall test, and so on and so forth. Check, analyze and evaluate of testing results in laboratory testing. Design asphalt concrete mixing ratio and trial mix. Prepare summary list of approved material and estimate the potential quantity of material. Follow up and report of laboratory testing progress.

Laboratory Engineer at New Phnom Penh International Airport (Techo Takhmao International Airport)

In charge of all material sampling and testing in laboratory for using in project. Arrange and monitor laboratory team work for laboratory testing such as CBR, Atterberg Limit, Sieve Analysis, Los Angeles Abrasion, Soundness, Flat and Elongated Particle, Specific Gravity, Sand Equivalent, and so on and so forth. Check, analyze and evaluate of testing results in laboratory testing. Summaries specification from FAA and ASTM for using in the project. Site inspection: PVD, PHD, and inclinometer installation (soil improvement work). Prepare summary list of approved material and estimate the potential quantity of material. Follow up and report of laboratory testing progress.

Material Engineer at CESS in association with Guangdong Provincial Changda Highway

In charge of all material sampling and testing in laboratory for using in project. Check, calibrate and verify load of laboratory equipment for operating laboratory. Arrange and monitor laboratory team work for laboratory testing such as CBR, Atterberg Limit, Sieve Analysis, Los Angeles Abrasion, Souness, Flat and Elongated Particle, Specific Gravity, Sand Equipvalent, Penetration, Ductility, Marshall test, and so on and so forth. Check, analyze and evaluate of testing results in laboratory testing. Design asphalt concrete mixing ratio and trial mix. Prepare summary list of approved material and estimate the potential quantity of material. Follow up and report of laboratory testing progress, and monthly report.

Site Engineer at UTE in association with Hanshin Engineering Construction

Review all the feasibility study of road and bridge documents related to the material requirements, its location to the project site, and the physical properties of the material, and the estimated quantities available. Find borrow source for using in the project. Site quality control for structure work: driven pile, reinforcement, formwork, casting concrete, field testing and surveying. Prepare daily, weekly, and monthly report.

Project Manager at Foresight Construction Co., Ltd.

Leading three projects: CFAVC - MRD - TK - 2A Batch3, SAMBATH/P2/EIB-08, and CFAVC - MRD - TK - 2A Batch3. Responsibilities include preparing BOQ, equipment lists, proposed key personnel, method statements, health & safety plan (COVID-19), site organization, mobilization schedule, and construction schedule for bidding; coordinating with MRD and stakeholders to ensure timely, safe, and compliant project delivery.

National Inspector at Road Asset Management Project II (RAMP-II) CW-1,5,6 & 7

In charge of all site quality control for road and bridge construction. Road works: proof rolling, FDT, material sampling on site, and preparation of daily/weekly/monthly reports to NRE. Bridge works: soil investigation (SPT), RC driven piles, CIP RC piles, reinforcement, formwork, casting concrete, and reporting to NBE. Also responsible for Safety and Environmental Social Safeguard tasks, including monthly environment checklists and gender-based staffing; reporting to NESSE.

Material Engineer at Road Asset Management Project II (RAMP-II) CW-2

In charge of all material sampling and testing in the laboratory for project use. Calibrate and verify laboratory equipment. Organize and monitor laboratory team work (tests: CBR, Atterberg Limit, Sieve Analysis, Los Angeles Abrasion, Soundness, Specific Gravity, Sand Equivalent, Marshall, etc.). Analyze and evaluate test results, design asphalt concrete mixing ratios and trial mixes, prepare lists of approved materials, estimate potential material quantities, and report testing progress.

Laboratory Engineer at New Phnom Penh International Airport (Techo Takhmao International Airport)

In charge of material sampling and laboratory testing for project inputs. Conduct various laboratory tests (CBR, Atterberg, Sieve, Los Angeles, etc.), summarize FAA/ASTM specifications for project use, site inspections (PVD, PHD, inclinometer installation), prepare approved material lists, estimate quantities, and monitor laboratory testing progress.

Material Engineer at Road Asset Management Project II (RAMP-II), CW-4

Managed material sampling and testing; calibrated lab equipment; coordinated laboratory team; performed tests (CBR, Atterberg, Sieve, LA Abrasion, Soundness, etc.); evaluated test results; designed asphalt concrete mixing ratio and trial mixes; prepared material approvals and quantities; tracked testing progress; produced monthly reports.

Site Engineer at Improvement of National Road No.21 (Korean Loan EDCE)

Reviewed feasibility studies related to materials, located borrow sources, and supervised site quality control for structures (driven piles, reinforcement, formwork, concrete casting). Prepared daily/weekly/monthly reports and coordinated with project stakeholders.

Project Manager at Foresight Construction Co., Ltd.

Oversee bidding for three projects: CFAVC-MRD-TK-2A Batch3, SAMBATH/P2/EIB-08, and related works; prepare BOQ, equipment list, proposed key personnel, method statement, health & safety plan (COVID-19), site organization, mobilization schedule, and construction schedule for bidding.

National Inspector at SBK in association with Renardet S.A.

In charge of site quality control for road and bridge construction; tasks include proof rolling, FDT, material sampling on site, and preparation of daily, weekly, and monthly reports to NRE; Bridge work: soil investigation (SPT), RC driven piles, CIP RC piles, reinforcement, formwork, casting; Safety and Environmental Social Safeguard tasks including monthly environment checklists and gender-based staff recruitment and crash reporting to NESSE.

Material Engineer at China Railway International Group (CRIG)

In charge of all material sampling and testing in laboratory; calibrate and verify laboratory equipment; organize laboratory team; conduct testing (CBR, Atterberg Limit, Sieve Analysis, Los Angeles Abrasion, Specific Gravity, Marshall test, etc.); design asphalt concrete mixing ratio and trial mixes; prepare lists of approved materials and estimate quantities.

Laboratory Engineer at New Phnom Penh International Airport (CAIC project)

In charge of material sampling and testing in the laboratory; coordinate laboratory testing; align results with FAA/ASTM specifications; site inspection activities (PVD, PHD, inclinometer installation); prepare summary of approved materials and estimate quantities; monitor laboratory progress.

Material Engineer at CESS in association with Guangdong Provincial Changda Highway

In charge of material sampling and testing; calibrate/verify laboratory equipment; manage lab team; perform tests (CBR, Atterberg, Sieve Analysis, Los Angeles, etc.); evaluate results; design asphalt concrete mixing ratio and trial; report testing progress.

Site Engineer at UTE in association with Hanshin Engineering Construction

Review feasibility studies; identify borrow sources; site quality control for structures (driven piles, reinforcement, formwork, casting); prepare daily/weekly/monthly reports.

Project Manager at Foresight Construction Co., Ltd.

Leading bids for CFAVC -MRD -TK -2ABatch3, SAMBATH/P2/EIB-08 projects; prepared BOQ, equipment list, proposed key personnel, method statements, health & safety plan including Covid-19 considerations, site organization, mobilization and construction schedules.

National Inspector at SBK in association with Renardet S.A.

In charge of site quality control for NR4 road and bridge works; supervise proof rolling, FDT, sampling; prepare daily/weekly/monthly reports to NRE; oversee bridge works including soil investigation, RC piles, reinforcement, formwork and concrete casting; manage safety and environmental safeguards and gender-based recruitment.

Material Engineer at China Railway International Group (CRIG)

In charge of all material sampling and testing in laboratory; calibrate and verify lab equipment; supervise laboratory team for tests (CBR, Atterberg Limit, Sieve Analysis, Los Angeles, etc.); evaluate testing results; design asphalt concrete mixing ratio and trial mix; prepare approved material lists and estimate material quantities; monitor testing progress.

Laboratory Engineer at Shanghai Baoye Group Corp. Ltd (MCC) / New Phnom Penh International Airport

In charge of all material sampling and testing in laboratory; supervise lab team for tests; summarize FAA/ASTM specifications for project; site inspections including PVD, PHD and inclinometer installation (soil improvement work); prepare material lists and estimate quantities; monitor laboratory testing progress.

Material Engineer at CESS in association with Guangdong Provincial Changda Highway

In charge of material sampling and testing; calibrate and verify lab equipment; supervise lab team; perform tests such as CBR, Atterberg, Sieve Analysis, Los Angeles, etc.; analyze results; design asphalt concrete mixing ratio and trial mix; prepare approved material lists and estimate quantities; monitor testing progress and monthly reporting.

Site Engineer at MPWT (National Road No.21 Improvement) / Korean Loan EDCE

Review feasibility studies related to material requirements and locations; identify borrow sources; supervise site quality control for structures (driven piles, reinforcement, formwork, casting); prepare daily/weekly/monthly reports.

Project Manager at Foresight Construction Co., Ltd.

Overseeing rural road improvement projects (DBST/Reinforced Concrete) and coordinating bidding-related activities; duties include preparing BOQ, equipment list, proposed key personnel, method statements, health & safety plan (COVID-19), site organization, mobilized schedule, and construction schedule for bidding.

National Inspector at SBK in association with Renardet S.A.

In charge of maintenance and upgrading works under RAMP-II AF CW-1,5,6&7; monitoring road and bridge construction quality, safety, environment safeguards, and reporting.

Material Engineer at China Railway International Group (CRIG)

CW-2, RAMP-II AF: in charge of material sampling, testing, equipment calibration, and laboratory management; design asphalt concrete mix and monitor material approvals.

Laboratory Engineer at Shanghai Baoye Group Corp. Ltd (MCC)

New Phnom Penh International Airport: material sampling/testing, laboratory testing program, FAA/ASTM summaries, site inspections (PVD, PHD, inclinometer installation).

Material Engineer at CESS in association with Guangdong Provincial Changda Highway

CW-4, RAMP-II: material sampling/testing, laboratory equipment calibration, testing progress reporting, and mix design.

Site Engineer at MPWT (Improvement of National Road No.21, Korean Loan EDCE Loan No.KHM-12)

Feasibility review of road/bridge documents, borrow source identification, site quality control for structures, and daily/weekly/monthly reporting.

Project Manager at Foresight Construction Co., Ltd.

Preparing BOQ, equipment list, proposed key personnel, method statement, health & safety plan on covid19, site organization, mobilized schedule, and construction schedule for bidding all the three project above.

National Inspector at SBK in association with Renardet S.A.

In charge of all site quality control for road and bridge construction; road works including proof rolling, FDT, sampling; bridge works including soil investigation, RC driven piles, CIP RC piles, reinforcement, formwork and casting; safety and environmental safeguard tasks with monthly reporting.

Material Engineer at China Railway International Group (CRIG)

In charge of all material sampling and testing; calibrate and verify laboratory equipment; supervise laboratory testing program (CBR, Atterberg limits, sieve analysis, Los Angeles, Marshall etc.); design asphalt concrete mixing ratios and trial mixes; prepare lists of approved materials and monitor testing progress.

Laboratory Engineer at Shanghai Baoye Group Corp. Ltd (MCC)

In charge of all material sampling and testing; manage laboratory team; summarize FAA/ASTM specifications; site inspection activities (PVD, PHD, inclinometer installation) related to soil improvement work; prepare material approval lists.

Material Engineer at CESS in association with Guangdong Provincial Changda Highway

In charge of all material sampling and testing; calibrate laboratory equipment; supervise laboratory team; testing and evaluation of results; design asphalt concrete mixes; prepare material approval lists and monitor progress.

Site Engineer at UTe in association with Hanshin Engineering Construction

Review feasiblity studies related to material requirements; identify borrow sources; site quality control for structural works including piles, reinforcement, formwork and concrete casting; prepare daily/weekly/monthly reports.

Project Manager at Foresight Construction Co., Ltd.

Responsible for preparing BOQ, equipment list, proposed key personnel, method statement, health & safety plan on covid19, site organization, mobilized schedule, and construction schedule for bidding the CFAVC-MRD-TK-2A Batch 3, SAMBATH/P2/EIB-08 projects.

National Inspector at SBK in association with Renardet S.A.

In charge of all site quality control for road and bridge construction. Road works: check proof rolling, FDT, sampling material on site, and prepare daily, weekly, and monthly reports. Bridge works: review soil investigation (SPT), RC driven piles, CIP RC piles, reinforcement, formwork, and casting; prepare reports. Safety and Environmental Social Safeguard tasks: monthly environment checklists, gender-based staff recruitment, and crash reporting.

Material Engineer at China Railway International Group (CRIG)

In charge of all material sampling and testing in the laboratory for project use. Calibrate and verify laboratory equipment. Manage laboratory team for testing (CBR, Atterberg Limit, Sieve Analysis, Los Angeles Abrasion, Soundness, Flat and Elongated Particles, Specific Gravity, Sand Equivalent, Penetration, Ductility, Marshall test, etc.). Analyze results, design asphalt concrete mixing ratio and trial mixes, prepare lists of approved materials and estimate quantities; monitor testing progress and reporting.

Laboratory Engineer at Shanghai Baoye Group Corp. Ltd (MCC)

In charge of material sampling and testing in the laboratory. Supervise laboratory team for testing (CBR, Atterberg, Sieve Analysis, Los Angeles Abrasion, Soundness, Flat and Elongated Particle, Specific Gravity, Sand Equivalent, etc.). Analyze results, reference FAA/ASTM specifications, and conduct site inspections (PVD, PHD, inclinometer installation) related to soil improvement works. Prepare lists of approved materials and estimate quantities; monitor testing progress.

Material Engineer at CESS in association with Guangdong Provincial Changda Highway

In charge of material sampling and testing in the laboratory; calibrate and verify laboratory equipment; supervise lab team for testing (CBR, Atterberg, Sieve, Los Angeles Abrasion, Soundness, Flat and Elongated Particles, Specific Gravity, Sand Equivalent, Penetration, Ductility, Marshall test, etc.). Design asphalt concrete mixing ratio and trial mixes; prepare lists of approved materials and estimate quantities; monitor testing progress and monthly reports.