Looks like you have JavaScript disabled. For the full Twine experience, you will need to re-enable it.

I am a Mechanical Engineer with an MSc from the University of Glasgow, specializing in CAD/CAE design, FEA simulations, and technical documentation. I have hands-on experience collaborating with international clients to redesign propulsion and wing systems for UAVs and to optimize battery packs. I am open to relocation and enjoy translating complex engineering challenges into clear, actionable designs. I bring a practical mindset to design, simulation, and manufacturing coordination, with a track record of delivering production-ready drawings, BOMs, and validated structural analyses. Based in Hyderabad, India, I am eager to contribute to multidisciplinary teams and continue expanding my expertise across the product development lifecycle.…I am a Mechanical Engineer with an MSc from the University of Glasgow, specializing in CAD/CAE design, FEA simulations, and technical documentation. I have hands-on experience collaborating with international clients to redesign propulsion and wing systems for UAVs and to optimize battery packs. I am open to relocation and enjoy translating complex engineering challenges into clear, actionable designs. I bring a practical mindset to design, simulation, and manufacturing coordination, with a track record of delivering production-ready drawings, BOMs, and validated structural analyses. Based in Hyderabad, India, I am eager to contribute to multidisciplinary teams and continue expanding my expertise across the product development lifecycle.

Saandilyaa Gundu

3D Designer, Product Designer, Designer, +4





I am a Mechanical Engineer with an MSc from the University of Glasgow, specializing in CAD/CAE design, FEA simulations, and technical documentation. I have hands-on experience collaborating with international clients to redesign propulsion and wing systems for UAVs and to optimize battery packs. I am open to relocation and enjoy translating complex engineering challenges into clear, actionable designs. I bring a practical mindset to design, simulation, and manufacturing coordination, with a track record of delivering production-ready drawings, BOMs, and validated structural analyses. Based in Hyderabad, India, I am eager to contribute to multidisciplinary teams and continue expanding my expertise across the product development lifecycle.…I am a Mechanical Engineer with an MSc from the University of Glasgow, specializing in CAD/CAE design, FEA simulations, and technical documentation. I have hands-on experience collaborating with international clients to redesign propulsion and wing systems for UAVs and to optimize battery packs. I am open to relocation and enjoy translating complex engineering challenges into clear, actionable designs. I bring a practical mindset to design, simulation, and manufacturing coordination, with a track record of delivering production-ready drawings, BOMs, and validated structural analyses. Based in Hyderabad, India, I am eager to contribute to multidisciplinary teams and continue expanding my expertise across the product development lifecycle.

Available to hire

I am a Mechanical Engineer with an MSc from the University of Glasgow, specializing in CAD/CAE design, FEA simulations, and technical documentation. I have hands-on experience collaborating with international clients to redesign propulsion and wing systems for UAVs and to optimize battery packs. I am open to relocation and enjoy translating complex engineering challenges into clear, actionable designs.

I bring a practical mindset to design, simulation, and manufacturing coordination, with a track record of delivering production-ready drawings, BOMs, and validated structural analyses. Based in Hyderabad, India, I am eager to contribute to multidisciplinary teams and continue expanding my expertise across the product development lifecycle.

Skills

Experience Level

Expert

Expert

Expert

Expert

Expert

Expert

Intermediate

Language

English

Fluent

Hindi

Advanced

Telugu

Advanced

Work Experience

Junior Engineer - Mechanical(Simulation) at Mechadyno Technologies

November 30, 2024 - September 28, 2025

Partnered with a US aerospace client to redesign propulsion and wing systems (concept design) for a UAV. Conducted vibration simulations on battery packs to validate safety standards. Optimized a 15 kWh Li-ion battery pack design, achieving a 10.2% weight reduction (20 kg). Reduced the end plate weight by 23.3% through static structural optimization. Validated strength with a factor of safety of 2 for the battery pack base plate via static structural analysis. Prepared technical documentation and reports.

Junior Engineer - Mechanical (Simulation) at Mechadyno Technologies

November 1, 2024 - September 28, 2025

Partnered with a US aerospace client to redesign propulsion and wing systems (concept design) for an unmanned Aerial Vehicle (UAV). Performed vibration simulations on battery packs, validating compliance with safety standards. Optimized the design of a 15 kWh Li-ion Battery Pack, reducing weight by 20 kg (10.2%). Optimized the design of the Battery module end plate by decreasing its weight by 23.3% using static structural simulation. Performed static structural simulation on the battery pack base plate to validate strength and achieve a factor of safety of 2. Prepared technical documentation and reports.

Junior Engineer - Mechanical (Simulation) at Mechadyno Technologies

November 1, 2024 - September 28, 2025

Partnered with a US aerospace client to redesign propulsion and wing systems (concept design) for an unmanned Aerial vehicle (UAV). Performed vibration simulations on battery packs, validating compliance with safety standards. Optimized design of a 15 KWh Li-ion Battery Pack, reducing weight by 20 kg (10.2%). Optimized the design of Battery module end plate by decreasing its weight by 23.3%, using static structural simulation. Performed static structural simulation on battery pack base plate to validate its strength or factor of safety of 2. Prepared technical documentation and report writing.

Junior Mechanical Engineer Intern at Mechadyno Technologies

August 31, 2024 - September 28, 2025

Designed an SPM (Special Purpose Machines) WAD seal testing machine from concept to production drawings. Created 3D models and 2D drawings for industrial camera enclosures and components. Performed CAD validation and prepared (defeatured) models for simulation studies. Assisted in BOM creation, part selection (bearings, couplings, pneumatics), and documentation. Participated in design reviews and cross-team discussions, ensuring project deliverables met standards.

Junior Mechanical Engineer Intern at Mechadyno Technologies

August 1, 2024 - September 28, 2025

Junior Mechanical Engineer Intern at Mechadyno Technologies

August 1, 2024 - September 28, 2025

Designed an SPM (Special Purpose Machines) WAD seal testing machine from concept to production drawings. Created 3D models and 2D drawings for industrial camera enclosures and components. Performed CAD validation and prepared (defeatured) models for simulation studies. Assisted in BOM creation, part selection (bearings, couplings, Pneumatics), and documentation. Participated in design reviews and cross-team discussions, ensuring project deliverables met standards.