Hi, I'm Gregory Smith, a highly skilled Electrician with decades of hands-on experience installing, maintaining, and repairing electrical wiring, equipment, and fixtures. I work on high voltage (277V) and low voltage (120V) systems, data networks (Cat5e/6), remote lighting circuits, programmable sensors, and fire alarm and emergency circuits, always following NEC rules and AA County specs. I’m comfortable from rough-in to punch-out and enjoy collaborating with teams to meet contractor deadlines. I’m open to relocation anywhere in the United States and authorized to work for any employer. I take pride in safety, clear communication, and delivering reliable electrical solutions, with a focus on quality and regulatory compliance.

Gregory Smith

Hi, I'm Gregory Smith, a highly skilled Electrician with decades of hands-on experience installing, maintaining, and repairing electrical wiring, equipment, and fixtures. I work on high voltage (277V) and low voltage (120V) systems, data networks (Cat5e/6), remote lighting circuits, programmable sensors, and fire alarm and emergency circuits, always following NEC rules and AA County specs. I’m comfortable from rough-in to punch-out and enjoy collaborating with teams to meet contractor deadlines. I’m open to relocation anywhere in the United States and authorized to work for any employer. I take pride in safety, clear communication, and delivering reliable electrical solutions, with a focus on quality and regulatory compliance.

Available to hire

Hi, I’m Gregory Smith, a highly skilled Electrician with decades of hands-on experience installing, maintaining, and repairing electrical wiring, equipment, and fixtures. I work on high voltage (277V) and low voltage (120V) systems, data networks (Cat5e/6), remote lighting circuits, programmable sensors, and fire alarm and emergency circuits, always following NEC rules and AA County specs. I’m comfortable from rough-in to punch-out and enjoy collaborating with teams to meet contractor deadlines.

I’m open to relocation anywhere in the United States and authorized to work for any employer. I take pride in safety, clear communication, and delivering reliable electrical solutions, with a focus on quality and regulatory compliance.

See more

Language

English
Fluent

Work Experience

Electrical Mechanic at Skilled labor Solutions
May 1, 2014 - Present
Assist companies in completing electrical tasks to meet general contractors deadlines. From rough-in to punch-out, run MC, 3/4 in, 1 in, and 2 in EMT. Work with 277V high voltage and 120V low voltage, Cat5e/6 data, remote lighting circuits, programmable sensors, fire alarm and emergency circuits. Tasks completed with substantial knowledge of NEC rules and AA County specs.
Electrical Mechanic at Thaler Electric
September 1, 2013 - March 1, 2014
Demolition and restoration work on an old hotel in downtown Baltimore, including wiring tasks as part of renovation; ensured NEC compliance and coordination with project team.
Electrical Mechanic at Fairall Electric
June 1, 2013 - September 1, 2013
Installed 3/4 in and 1 in conduit for remodel; installed new lighting and emergency circuits per NEC; installed CCTV circuit for door monitoring and store security; retrofitted store signs and expanded an existing fire alarm system.
Electrical Mechanic at Construction Labor Corp
October 1, 2012 - May 1, 2013
Installed, repaired and maintained electrical components in the commercial field. Read and interpreted electrical prints and NEC code requirements. Bent EMT (3/4 inch to 1 1/2 inch), rigid and galvanized; pulled wire; installed transformers; performed site work; fire alarm and control wiring. Supervised three to eight apprentices.
Electrical Mechanic at Atomas Electric Inc
November 1, 2010 - September 1, 2011
Installed, repaired and maintained electrical components per plans; oversaw up to six electricians; managed work across two locations.
Electrical Mechanic at Skill Force Inc
April 1, 2010 - November 1, 2011
Residential and commercial electrical work; created and assigned tasks for crew; bent EMT; pulled Romex, BX/MC; installed, repaired and maintained electrical equipment; NEC and OSHA knowledge.
Electrical Mechanic at Personal Electric
February 1, 2009 - August 1, 2010
Managed traffic safety measures around road construction; ensured safe movement of motorists and crew; provided reliable safety provisions to protect staff and enable completion of work.
Electrical Mechanic at Hirsh Electric
June 1, 2002 - May 1, 2004
Installed, repaired and maintained electrical equipment; kept up-to-date with NEC and OSHA updates.
Electrical Mechanic at Fleet Electric
August 1, 1993 - December 1, 1995
Wired, installed, maintained and repaired electrical equipment; supervised a crew of 6–12 employees; delegated jobs from start to finish.
Electrical Assistant at W.W. Electric
September 1, 1989 - February 1, 1992
Helped with installation and repairs of electrical components; began working while attending school at ABC Education.

Education

Electrical Construction and Maintenance Program at Eastern High School
January 11, 2030 - June 1, 1989

Qualifications

Food Handler Certification
January 11, 2030 - March 1, 2026
Non-CDL Class C
January 11, 2030 - March 1, 2026

Industry Experience

Real Estate & Construction, Manufacturing, Professional Services, Other