Available to hire
I’m Nasib Fahim Fernández, an Electronic Engineer with over 10 years of experience leading the end-to-end development of hardware products, from concept to mass production. I’m skilled at managing multidisciplinary teams across hardware, mechanics, and firmware, ensuring seamless integration and execution. I have strong expertise in IoT, DFM, testing, and validation. I have delivered products ranging from consumer electronics to aerospace technology, collaborating with startups and global corporations.
I thrive in fast-paced environments and enjoy turning complex requirements into robust, scalable hardware and embedded software solutions. I’m passionate about IoT, power electronics, RF design, and advanced manufacturing practices, and I’m always eager to learn and apply new technologies to push product performance and quality.
Language
English
Fluent
Portuguese
Intermediate
Arabic
Intermediate
Spanish; Castilian
Fluent
Work Experience
Electronic Engineer Consultant
April 1, 2019 - November 5, 2025Conceptualization, schematic capture, and PCB design; Production organization, supply chain management, manufacturing, and factory testing.
IoT Embedded Systems Director and Lead HW Designer at Noa Technologies
June 1, 2021 - November 5, 2025Director of HW and FW, leading multidisciplinary teams to deliver advanced IoT positioning solutions. RF design, high-speed MCU-based digital systems, GPS, BLE, LTE, and ultra-low power battery-powered systems.
Electronic Engineer Ambassador at LastBasic
January 1, 2024 - January 1, 2024Helping startups develop their electronic products. Support in conceptualization, design, and production consulting.
Lead EE Product Engineer at Tapp Water
January 1, 2021 - January 1, 2021Development of electronic systems for water monitoring and filtration. Design of analog electronics, sensors, mixed-signal, and RF (BLE, NFC).
CTO at ZimaProject NGO
January 1, 2019 - January 1, 2019Leadership of the NGO’s technological initiatives. Design of solar-powered systems.
Hardware Design Engineer at Airbus Defence and Space
January 1, 2018 - January 1, 2018Power electronics design for propulsion stages in space missions.
Hardware/Firmware Design Engineer at ThyssenKrupp Manufacturing
September 1, 2016 - September 1, 2016Development of control electronics and firmware for elevators; Power electronics and high-speed digital design.
Researcher at UC3M RoboticsLab
December 1, 2016 - December 1, 2016Hardware/Firmware Design Engineer pursuing biomimetic exoskeletons; design of electronic control systems for biomimetic applications.
Project Manager at IFT UAM - CSIC (DESI-Spain project)
December 1, 2014 - December 1, 2014Organization and structuring of the international astrophysics project DESI.
Associate Researcher at HCTLab, EPS – UAM
February 1, 2015 - February 1, 2015Design of electronic control systems for microrobotics, microprocessor-based systems, and ultra-low-power, highly integrated solutions.
Hardware/Firmware Design Engineer at Airbus Defence and Space
January 1, 2018 - January 1, 2018Power electronics design for propulsion stages in space missions.
Researcher at RoboticsLab (UC3M) research group
December 1, 2016 - December 1, 2016Pursuing a PhD in Robotics; Design of electronic control systems for biomimetic exoskeletons.
Researcher at HCTLab (EPS – UAM) research group
February 1, 2015 - February 1, 2015Associate Researcher at Universidad Autónoma de Madrid; Design of electronic control systems for microrobotics, microprocessor-based systems, and ultra-low-power, highly integrated solutions.
Project Manager at DESI-Spain project (IFT UAM - CSIC)
December 31, 2014 - December 31, 2014Organization and structuring of the international astrophysics project DESI. Filtering and quality monitoring of liquid in real-time.
Electronic Engineer Consultant at Independent / Self-employed
April 1, 2019 - PresentConceptualization, schematic capture, and PCB design. Production organization, supply chain management, manufacturing, and factory testing.
Electronic Engineer Ambassador at LastBasic
November 1, 2020 - January 1, 2024Helping startups develop their electronic products. Support in conceptualization, design, and production consulting.
Lead EE Product Engineer at Tapp Water
June 1, 2019 - January 1, 2021Development of electronic systems for water monitoring and filtration. Design of analog electronics, sensors, mixed-signal, and RF (BLE, NFC).
CTO at ZimaProject NGO
December 1, 2017 - January 1, 2019Leadership of the NGO’s technological initiatives. Design of solar-powered systems.
Hardware Design Engineer at Airbus Defence and Space
December 1, 2016 - January 31, 2018Power electronics design for propulsion stages in space missions.
Researcher at RoboticsLab (UC3M)
September 1, 2016 - December 1, 2016Pursuing a PhD in Robotics; Design of electronic control systems for biomimetic exoskeletons.
Researcher at HCTLab (EPS – UAM)
September 1, 2011 - February 1, 2015Associate Researcher at Universidad Autónoma de Madrid; Design of electronic control systems for microrobotics, microprocessor-based systems, and ultra-low-power, highly integrated solutions.
Project Manager at DESI-Spain project (IFT UAM - CSIC)
December 1, 2013 - December 1, 2014Project Manager of the DESI-Spain project. Organization and structuring of the international astrophysics project DESI. Filtering and quality monitoring of liquid in real-time.
Project Manager at IFT UAM - CSIC (DESI-Spain project)
December 1, 2013 - December 1, 2014Organization and structuring of the international astrophysics project DESI; Filtering and quality monitoring of liquid in real-time.
Education
Telecommunication Engineering (Specialty in Electronic Systems) at Escuela Politécnica Superior, UAM
January 1, 2007 - January 1, 2013Exchange program at Polytechnic University of Catalonia (UPC)
January 1, 2011 - January 1, 2012Master in Research and Development of ICT Technologies at Escuela Politécnica Superior, UAM
January 1, 2013 - January 1, 2014Telecommunication Engineering (Specialty in Electronic Systems) at Escuela Politécnica Superior, UAM
January 1, 2007 - December 31, 2013Exchange program (Sicue) at Polytechnic University of Catalonia at Polytechnic University of Catalonia (UPC)
January 1, 2011 - December 31, 2012Master in Research and Development of ICT Technologies at Escuela Politécnica Superior, UAM
January 1, 2013 - December 31, 2014Telecommunication Engineering (Specialty in Electronic Systems) at Escuela Politécnica Superior, UAM
January 1, 2007 - January 1, 2013Exchange program (Sicue program) at Polytechnic University of Catalonia (UPC)
January 1, 2011 - January 1, 2012Master in Research and Development of ICT Technologies at Escuela Politécnica Superior, UAM
January 1, 2013 - January 1, 2014Telecommunication Engineering (Specialty in Electronic Systems) at Universidad Autónoma de Madrid (UAM)
January 1, 2007 - January 1, 2013Fourth course (Sicue program) at Polytechnic University of Catalonia
January 1, 2011 - January 1, 2012Master in Research and Development of ICT Technologies at Escuela Politécnica Superior, UAM
January 1, 2013 - January 1, 2014ELECTRATRAINING: Design of printed circuits with Altium tools at ELECTRATRAINING
January 11, 2030 - February 2, 2026ELECTRATRAINING: Electromagnetic compatibility and signal integrity in printed circuits designing at ELECTRATRAINING
January 11, 2030 - February 2, 2026Qualifications
PFC: Control electronics of a micro-robot for micrometric positioning of an optical fiber in a telescope focal plane
January 11, 2030 - November 5, 2025TFM: Electronics design and control algorithms for the micro-positioning of optical fibers in astrophysical instrumentation
January 11, 2030 - November 5, 2025ELECTRATRAINING: Design of printed circuits with Altium tools
January 11, 2030 - November 5, 2025ELECTRATRAINING: Electromagnetic compatibility and signal integrity in printed circuits designing
January 11, 2030 - November 5, 2025Altium training
January 11, 2030 - November 5, 2025Electromagnetic compatibility and signal integrity in printed circuits designing
January 11, 2030 - November 5, 2025Design of printed circuits with Altium tools
January 11, 2030 - January 11, 2026Electromagnetic compatibility and signal integrity in printed circuits designing
January 11, 2030 - January 11, 2026PFC: Control electronics of a micro-robot for the micrometric positioning of an optical fiber in a telescope focal plane
January 11, 2030 - January 11, 2026TFM: Electronics design and control algorithms for the micro-positioning of optical fibers in astrophysical instrumentation
January 1, 2013 - January 1, 2014Patent No. 20382411.5 -1101
January 11, 2030 - January 11, 2026PFC: Control electronics of a micro-robot for the micrometric positioning of an optical fiber in a telescope focal plane
January 11, 2030 - February 2, 2026ELECTRATRAINING: Design of printed circuits with Altium tools
January 11, 2030 - February 2, 2026ELECTRATRAINING: Electromagnetic compatibility and signal integrity in printed circuits designing
January 11, 2030 - February 2, 2026Industry Experience
Computers & Electronics, Manufacturing, Telecommunications, Software & Internet, Professional Services, Media & Entertainment, Education
Hire a Product Designer
We have the best product designer experts on Twine. Hire a product designer in Barcelona today.