Available to hire
Hi, I’m Ion Leahu. I’m a hardworking professional with a positive attitude to challenges and opportunities. I have strong technical skills with a minimum of 10 years of experience in the manufacturing industry, and I an analytical mind and detail-oriented focus to improve processes.
I’m a true researcher with very practical skills, combining hands-on operations with rigorous problem solving to deliver high-quality results and continuous improvement.
Experience Level
Expert
Expert
Intermediate
Intermediate
Intermediate
Intermediate
Language
English
Fluent
Romanian, Moldavian, Moldovan
Advanced
Work Experience
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews for high-profile political, social, and economic surveys.
Market Researcher at Institute of Marketing and Polls (IMAS - INC)
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour insights, likes/dislikes, perceptions and attitudes on market research subjects.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; reduced variability in manufacturing by ensuring standard work methods and work instructions are up to date; developed solutions to production problems; responsible for the sustainability of tools and equipment at the site.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests according to SOPs; implemented 5S; supported colleagues; ensured timely production and high quality; generated First Article Inspection Reports; performed visual and dimensional inspections; accepted/rejected finished products and recommended adjustments.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL), Worcester, UK
November 1, 2022 - October 25, 2025Measured and visually inspected components using a range of equipment; reviewed certificates of conformity; ensured calibration; implemented quality/testing procedures; used SAP (R3P) QM modules; identified root causes and conducted corrective actions; trained staff and supported management.
Quality Manager at Quality Springs and Pressings – Redditch, UK
December 1, 2023 - October 25, 2025Responsible for ISO 9001 compliance; managed quality KPIs; led quality projects from concept to completion (PPAP level 3, PFMEA, Control Plan, ISIR, capability studies, MAT cert, CMM Dim Report with samples); monitored supplier/customer quality performance and on-time delivery; conducted internal/external audits and drove continuous improvement.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich, UK
January 1, 2025 - October 25, 2025Defined and implemented supplier quality content; consulted with Engineering, IT, Quality, EHS and Purchasing; conducted internal and external audits; raised and analyzed supplier non-conformances; maintained supplier scorecards; managed 8D events and RCA; handled PPAP, ISIR, FAIRs and QMS compliance; supported supplier onboarding with risk-based approach.
Process Quality Engineer at Vanguard Foundry – Stourbridge, UK
May 1, 2025 - October 25, 2025Generated and controlled quality data; led RCA teams to resolve quality issues; implemented process controls; managed internal and external rejects; created quality documents (quality alerts, care points, OP cards, WI, SOP); supported product development and audits; drove continuous improvement.
Quality Engineer at Mettis Aerospace – Redditch, UK
May 1, 2025 - PresentParticipate in daily SQCDP meetings; eradicate process variability and implement robust process controls; support NPI and PPAP submissions (FMEA, Control Plan, PFMEA, ISIR); coordinate NADCAP/UKAS testing; address day-to-day quality issues; provide training and produce daily RFT and monthly quality reports; support PPAP submissions to customers.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews across high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls IMAS-INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes and dislikes, perceptions and attitudes on market research subjects.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; developed solutions; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and tested products according to SOPs; worked to 5S principles; supported production to meet schedule; generated First Article Inspection Reports; performed visual and measurement tests; assessed finished products for conformance and coordinated rework where needed.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and visually inspected components to drawings using a range of equipment; reviewed certificates of conformity; maintained control plans and QMS compliance; performed calibrations; used SAP (R3P) QM modules; supported supplier quality and audits.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Responsible for ISO 9001 compliance; managed quality KPIs; led PPAP level 3 activities; monitored supplier/customer quality performance and on-time delivery; led internal/external audits and continuous improvement initiatives.
Supplier Quality Engineer at Doncasters Precision Castings Deritend
January 1, 2025 - October 25, 2025Defined and implemented supplier quality controls; raised and analyzed NCRs, led 8D problem-solving; performed goods-in inspection; supported PPAP/FSQA; coached suppliers and supported NPI; traveled to suppliers/customers as needed.
Process Quality Engineer at Vanguard Foundry
May 1, 2025 - October 25, 2025Generated and controlled quality data; led RCA teams using 5 Whys, 8D and corrective actions; managed rejects and scrap reviews; created quality documents and SOPs; supported audits and continuous improvement; used measurement equipment and QMS.
Quality Engineer at Mettis Aerospace
May 1, 2025 - PresentParticipated in daily SQCDP meetings; eradicated process variability; supported NPI; addressed day-to-day quality issues using 8D, PPAP and FMEA; ensured AS9100 compliance; prepared and submitted PPAP, FMEA, PFMEA, and related documentation; produced management reports; acted as main customer quality contact.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Conducted face-to-face and focus group interviews for high-profile political, social and economic surveys, coordinating logistics and respondent engagement.
Market Researcher at Institute of Marketing and Polls. IMAS -INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behavior data and perceptions to support market research activities.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and methods; monitored and improved processes; production planning and control; ensured standard work methods and up-to-date work instructions; developed solutions to production problems; maintained sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna)
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests per SOP; applied 5S; ensured on-time production; conducted First Article Inspections; visual inspections; approved/rejected products and recommended process adjustments.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and inspected components to drawings using vernier, micrometer, CMM, and other equipment; reviewed certificates of conformity; maintained calibration; identified root causes and implemented corrective actions; supported supplier quality activities.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Ensured ISO 9001 compliance; managed quality KPIs; led quality projects (PPAP, PFMEA, ISIR, CAPA) and internal/external audits; oversaw supplier/customer quality and continuous improvement.
Supplier Quality Engineer at Doncasters Precision Castings Deritend
January 1, 2025 - October 25, 2025Managed supplier and customer quality, raised and analyzed NCRs, led 8D investigations, performed goods-in inspection and supported PPAP/ISIR processes; maintained QA documentation and supplier approvals.
Process Quality Engineer at Vanguard Foundry
May 1, 2025 - October 25, 2025Generated and controlled quality data; led RCA teams (5 Whys, 8D) to resolve issues; managed internal/external rejects; created quality documents and supported audits and continuous improvement.
Quality Engineer at Mettis Aerospace
May 1, 2025 - PresentParticipate in daily SQCDP meetings; reduce process variability; support NPI and PPAP; ensure AS9100 compliance; coordinate NADCAP/UKAS testing and training; support PPAP submissions and customer communications.
Quality Engineer at Mettis Aerospace – Redditch, UK
May 1, 2025 - PresentParticipates in daily SQCDP meetings and supports manufacturing operations to deliver right-first-time quality. Drives process quality improvements, analyzes data, and communicates with stakeholders. Ensures PPAP/FAIR compliance, customer requirements, and QMS alignment; supports MRB activities, training, and supplier quality collaboration; maintains quality documentation and supports audits.
Process Quality Engineer at Vanguard Foundry – Stourbridge, UK
May 1, 2025 - October 25, 2025Leads RCA teams to identify and resolve quality issues using tools such as 5 Whys, 8D and PFMEA. Manages internal/external rejects, maintains and distributes quality data, conducts scrap and customer return reviews, and ensures process controls and QMS compliance. Supports customer audits and documentation for quality improvements.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich, UK
January 1, 2025 - October 25, 2025Defines and implements supplier quality requirements, conducts internal and external audits, interprets customer drawings and standards for suppliers, and acts as primary contact for supplier quality. Manages NCRs via 8D, maintains supplier scorecards, and coordinates PPAP/ISIR activities; supports NPI, calibration, and training, and ensures QMS compliance.
Quality Manager at Quality Springs and Pressings – Redditch, UK
December 1, 2023 - October 25, 2025Ensures ISO 9001 compliance and oversees quality KPIs (PPM, supplier/customer quality, on-time delivery, cost of quality). Manages quality projects end-to-end (PPAP/ISIR/FS, CAPA), supplier/customer corrective actions (8D), internal/external audits, and customer communications. Develops supplier quality requirements, calibrates measuring equipment, and drives continuous improvement.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembles and tests products according to SOPs to ensure quality for JLR. Performs 5S, supports delivery of production targets, conducts First Article Inspection Reports, visual and measurement testing, and acceptance/rejection decisions; raises quality issues and recommends process adjustments.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL) – Worcester, UK
November 1, 2022 - October 25, 2025Measures and visually inspects components to drawings using vernier, micrometers, microscopes, CMM, NDT, and other equipment. Reviews certificates of conformity, maintains calibration, ensures QMS compliance, and supports root-cause analysis for quality issues; uses SAP QM modules and coordinates with suppliers and internal teams.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researches new products and ways of working; monitors and improves processes; handles production planning and control; ensures standard work methods and up-to-date work instructions; develops solutions to production problems and ensures maintenance of tools and equipment.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS Chisinau
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews across high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls. IMAS -INC Chisinau
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes/dislikes, perceptions and attitudes on subjects central to market research activities.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Conducted face-to-face and focus group interviews across high-profile political, social and economic surveys; supported project coordination and data collection.
Market Researcher at Institute of Marketing and Polls. IMAS -INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes/dislikes, perceptions and attitudes for market research activities.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; reduced manufacturing variability by updating standard work methods and work instructions; developed solutions to production problems; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests per SOP; applied 5S principles; supported colleagues; achieved production targets; generated First Article Inspection Reports; performed visual and measurement tests; accepted/rejected finished products and drove process improvements.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL), Worcester
November 1, 2022 - October 25, 2025Measured and visually inspected components to drawing; evaluated certificates of conformity; maintained control plans and documentation; ensured QMS compliance; performed calibrations; supported SAP QM workflows; collaborated with suppliers and quality team to resolve issues.
Quality Manager at Quality Springs and Pressings – Redditch
December 1, 2023 - October 25, 2025Ensured ISO 9001 compliance; managed quality KPIs; led PPAP submissions (PSW, Process Flow, FMEA, Control Plan, ISIR, capability studies, CMM reports); monitored supplier/customer quality and on-time delivery; drove continuous improvement and audits.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich
January 1, 2025 - October 25, 2025Primary focus on supplier and customer quality; conducted internal/external audits; interpreted customer requirements into purchasing specs; managed NCRs and 8D-based corrective actions; maintained supplier performance scorecards; ensured ISO9001/AS9100 compliance; supported NPI and PPAP activities; coordinated goods-in inspections and supplier training.
Process Quality Engineer at Vanguard Foundry – Stourbridge
May 1, 2025 - October 25, 2025Generated, controlled and reviewed quality data; led RCA teams (5 Whys, 8D); managed rejects and customer returns; created quality documents (quality alerts, WI, SOP); supported audits and continuous improvement; maintained QMS documentation and process controls; performed customer-facing quality activities.
Quality Engineer at Mettis Aerospace – Redditch
May 1, 2025 - PresentParticipate in daily SQCDP meetings; reduce process variability; support NPI; interface with internal/external stakeholders; support MRB and scrap/concession reduction; ensure AS9100 and customer requirements; oversee forged, machined and assembled parts; support PPAP submissions (FMEAs, Control Plans, PFMEA, FAIR); coordinate with NADCAP/UKAS labs; drive process improvements and training.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face and focus group interviews for high-profile political, social and economic surveys; supported project coordination and data collection activities.
Market Researcher at Institute of Marketing and Polls. IMAS -INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes/dislikes, perceptions and attitudes for market research initiatives.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and methods; monitored and improved processes; performed production planning and control; reduced variability through standard work methods; developed solutions; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests according to SOPs; adhered to 5S; ensured on-time production; generated First Article Inspection Reports; performed visual inspections and accepted/rejected products; recommended process adjustments to drive quality improvements.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL) Worcester, UK
November 1, 2022 - October 25, 2025Measured and visually inspected components against drawings using a range of equipment; reviewed certificates of conformity; maintained control plans and documentation; ensured QMS compliance; identified root causes and implemented corrective actions; performed calibrations and SAP QM handling.
Quality Manager at Quality Springs and Pressings – Redditch, UK
December 1, 2023 - October 25, 2025Ensured ISO 9001 compliance; managed quality KPIs; led quality projects from concept to completion (PPAP level 3); monitored supplier/customer quality performance and on-time delivery; conducted internal/external audits and supported corrective actions.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich, UK
January 1, 2025 - October 25, 2025Managed supplier and customer quality; conducted internal/external audits; raised and analyzed NCRs, led RCAs via 8D; developed supplier scorecards; supported PPAP/ISIR processes; provided training and quality reporting.
Process Quality Engineer at Vanguard Foundry – Stourbridge, UK
May 1, 2025 - October 25, 2025Generated and controlled quality data; led RCA teams; managed rejects and process controls; developed quality documentation and supported audits; drove improvements to reduce variability and ensure QMS compliance.
Quality Engineer at Mettis Aerospace – Redditch, UK
May 1, 2025 - PresentParticipated in daily SQCDP meetings; reduced process variability; supported NPIs/PPAP submissions; ensured AS9100 and customer requirements; oversaw processes for forged, machined and assembled aerospace components; provided training and leadership in quality procedures.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews across high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls. IMAS -INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes and dislikes, perceptions and attitudes on subjects which are the focus of market research activities.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; reduced variability in manufacturing by ensuring standard work methods and up-to-date work instructions; developed solutions to production problems; responsible for sustainability of tools and equipment at the site.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembly and electrical testing to SOPs; 5S; collaboration with colleagues; ensured on-time delivery of high-quality products; generated First Article Inspection Reports; performed visual inspections and decisions on acceptance/rejection; recommended process adjustments for quality improvements.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and visually inspected components to drawings; reviewed certificates of conformity; maintained control plans; ensured QMS compliance; identified root causes and implemented corrective actions; managed calibration and used SAP QM; liaised with suppliers and quality teams.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Responsible for ISO 9001 compliance; managed quality KPIs; led quality projects (PPAP level 3); monitored supplier and customer quality performance; conducted statistical analyses and audits; supported continuous improvement and supplier development.
Supplier Quality Engineer at Doncasters Precision Castings Deritend
January 1, 2025 - October 25, 2025Provided supplier-focused quality support to maintain product quality; raised and analyzed supplier NCRs using 8D; maintained supplier scorecards; supported PPAP and new supplier assessments; promoted Lean/Six-Sigma methods; delivered training on quality in the supply chain; performed goods-in inspection and documentation.
Process Quality Engineer at Vanguard Foundry
May 1, 2025 - October 25, 2025Generated and controlled quality data; led RCA teams using 5 Whys, 8D and corrective action tracking; reviewed rejects; produced quality documents (QAs, WI, SOPs); maintained QMS compliance; drove targeted improvements and reduced casting variability; produced SOPs and process documentation; supported customer audits.
Quality Engineer at Mettis Aerospace
May 1, 2025 - PresentParticipate in daily SQCDP meetings; supported manufacturing operations to deliver right-first-time results; reduced scrap/concessions; ensured AS9100 compliance; oversaw processes for forged, machined, and assembled aircraft components; supported PPAP submissions and continuous improvement; main quality contact with customers and laboratories; provided training and process/product audits.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face and focus group interviews across a range of high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls IMAS -INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes and dislikes, perceptions and attitudes on market research subjects.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and methods; monitored and improved processes; production planning and control; reduced variability by ensuring standard work methods and up-to-date instructions; developed solutions to production problems; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled and tested products to SOPs; performed 5S; produced First Article Inspection Reports; conducted visual and measurement tests; accepted/rejected finished products; recommended process adjustments to drive quality improvements.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and visually inspected components to drawings using various equipment; reviewed certificates of conformity; ensured QMS compliance; identified root causes and instigated corrective actions; approved FAIR reports; calibration procedures; used SAP (R3P) QM modules; trained and supervised 3rd party quality staff; liaised with suppliers and internal teams.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Responsible for ISO 9001 compliance; managed quality KPIs; led PPAP level 3 activities; managed supplier/customer quality performance and on-time delivery; led internal/external audits; drove continuous improvement and corrective actions.
Supplier Quality Engineer at Doncasters Precision Castings Deritend
January 1, 2025 - October 25, 2025Defined and implemented supplier quality content; consulted with Engineering, IT, Quality, EHS and Purchasing; conducted internal and external audits; interpreted customer requirements into supplier standards; primary contact for suppliers; managed supplier NCRs and 8D reporting; maintained supplier scorecards; supported new supplier additions with risk-based approach; delivered training on supplier quality; supported NPI; performed goods-in inspection; ensured ISO9001 and AS9100 compliance; travel to suppliers/customers as required; reporting.
Process Quality Engineer at Vanguard Foundry
May 1, 2025 - October 25, 2025Generated, controlled, monitored and reported quality data to identify trends; led RCA teams using 5 Whys and 8D; managed internal and external rejects and disposition; conducted scrap and customer return reviews; created quality documents (quality alerts, work instructions, WI, SOP); maintained quality data; conducted audits; supported product development; trained staff; conducted process/product audits; supported customer audits.
Quality Engineer at Mettis Aerospace
May 1, 2025 - PresentParticipate in daily SQCDP meetings; eradicate process variability; support NPI; liaise with internal/external stakeholders; manage MRB and reduce scrap/concessions; ensure AS9100 compliance; support PPAP submissions (FMEAs, Control Plan, Flow Process, FAIR); provide training; daily walkarounds and reporting; main quality contact for customers.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews for high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls (IMAS-INC)
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes and dislikes, perceptions and attitudes on subjects which are the focus of market research activities.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; reduced variability by ensuring standard work methods and up-to-date work instructions; developed solutions to production problems; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests; worked to 5S principles; supported production targets; conducted visual inspections; generated First Article Inspection Reports; ensured quality, health and safety guidelines; managed Just In Time delivery to JLR; accepted/rejected products and recommended process adjustments.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and visually inspected components to drawings using diverse tools (vernier, micrometer, microscope, shadowgraph, elcometer, gauges, CMM, NDT); reviewed certificates of conformity; ensured calibration; maintained QMS compliance; identified root causes and implemented corrective actions; managed FAIR/Vendor approvals and SAP QM processes.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Responsible for ISO 9001 compliance; managed quality KPIs; led PPAP, PSW, PFMEA, Control Plans, ISIR, capability studies, MSA; coordinated corrective actions (8D); supervised staff; led internal/external audits; drove continuous improvement.
Supplier Quality Engineer at Doncasters Precision Castings Deritend
January 1, 2025 - October 25, 2025Primary supplier and customer-focused quality role to sustain and improve supplier quality; conducted internal and external audits; interpreted customer drawings and standards; managed supplier non-conformances and 8D investigations; produced supplier scorecards; supported NC/NCR resolution; ensured ISO 9001 and AS9100 compliance; supported new supplier onboarding and goods-in inspection; travel to suppliers as required.
Process Quality Engineer at Vanguard Foundry
May 1, 2025 - October 25, 2025Generated, controlled and reviewed quality data; led RCA teams; managed internal/external rejects; conducted scrap and customer return reviews; created quality documents (quality alerts, care points, WI, SOP); maintained QMS data; conducted audits; driven improvements and PPAP/NPI support.
Quality Engineer at Mettis Aerospace
May 1, 2025 - PresentParticipate in daily SQCDP meetings; eradicate process variability; support NPI; interface with stakeholders; support MRB; ensure AS9100 compliance; oversee forged and machined components; support PPAP submissions (FMEA, Control Plan, Flow Process, FAIR); main quality contact for customers; provide training; conduct regular process/product audits; coordinate NADCAP/UKAS testing capabilities.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Conducted face-to-face and focus group interviews for high-profile political, social and economic surveys, coordinating logistics and ensuring data quality.
Market Researcher at Institute of Marketing and Polls IMAS-INC
December 1, 2013 - October 25, 2025Collected consumer insights, opinions and behaviour data; analyzed perceptions and attitudes to support market research activities.
Engineer at Wine Factory Stauceni – NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; developed standard work instructions; addressed production problems; maintained tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich
May 1, 2018 - October 25, 2025Assembled components for Just In Time delivery to Jaguar Land Rover; performed assembly and electrical tests per SOP; maintained 5S; generated First Article Inspection Reports; conducted visual inspections; approved/rejected products; recommended process adjustments.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and inspected components to drawings using a range of instruments; reviewed certificates of conformity; ensured calibration; maintained QMS compliance; identified root causes and implemented corrective actions; used SAP QM; supported supplier communications.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Ensured ISO 9001 compliance; managed quality KPIs; led quality projects including PPAP level 3; conducted supplier/customer audits; supervised staff; supported continuous improvement and training.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich
January 1, 2025 - October 25, 2025Defined supplier quality content; managed supplier NCRs; led RCA with 8D; produced supplier scorecards; supported customer complaints; ensured supplier accreditations; assisted with new product introductions; performed goods-in inspection.
Process Quality Engineer at Vanguard Foundry – Stourbridge
May 1, 2025 - October 25, 2025Led RCA teams; controlled rejects; generated quality documents; conducted audits; drove process improvements; supported product development; prepared SOPs and WI; maintained QMS; conducted customer audits.
Quality Engineer at Mettis Aerospace – Redditch
May 1, 2025 - PresentParticipated in daily SQCDP meetings; reduced process variability; supported NPI and MRB; ensured AS9100 compliance; assisted PPAP submissions; coordinated lab testing; conducted audits; trained staff; delivered quality reports.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews across a range of high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls. IMAS -INC Chisinau
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes and dislikes, perceptions and attitudes on subjects central to market research activities.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; reduced variability by ensuring standard work methods and up-to-date work instructions; developed solutions to production problems; maintained tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests to SOPs; worked to 5S; ensured on-time delivery and quality; generated First Article Inspection Reports; conducted visual and measurement inspections; recommended process adjustments to drive quality improvements.
Quality/ Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL) Worcester, UK
November 1, 2022 - October 25, 2025Measured and visually inspected components against drawings using varied equipment; evaluated certificates of conformity; maintained control plans and calibration; identified root causes and implemented corrective actions; managed SAP QM lots.
Quality Manager at Quality Springs and Pressings – Redditch, UK
December 1, 2023 - October 25, 2025Responsible for ISO 9001 compliance; managed quality KPIs; led quality projects from concept to completion (PPAP level 3, ISIR, FMEA, Control Plans, CAPAs); managed supplier and customer quality performance; supervised staff and audits.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich, UK
January 1, 2025 - October 25, 2025Primary SQE role to maintain supplier and customer quality, drive continuous improvement, conduct internal/external audits, manage NCRs and 8D problem solving, support NPI and PPAP, and ensure compliance with QMS (ISO9001/AS9100) and customer requirements.
Process Quality Engineer at Vanguard Foundry – Stourbridge, UK
May 1, 2025 - October 25, 2025Generated and controlled quality data, led RCA teams (5 Whys, 8D), managed rejects and scrap reviews, created quality documents (quality alerts, WI, SOPs), conducted internal/external audits, and drove targeted improvements to reduce non-conformances.
Quality Engineer at Mettis Aerospace – Redditch, UK
May 1, 2025 - PresentParticipates in daily SQCDP meetings, eliminates process variability, supports NPIs, interfaces with stakeholders, supports MRB, ensuring AS9100 compliance, PPAP submissions and customer communications; conducts process/product audits.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Completed face-to-face or focus group interviews for high-profile political, social, and economic surveys, ensuring data quality and effective participant engagement.
Market Researcher at Institute of Marketing and Polls (IMAS - INC)
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes/dislikes, perceptions and attitudes for market research activities.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and methods; monitored and improved processes; performed production planning and control; reduced variability by maintaining up-to-date standard work methods and work instructions; developed solutions to production problems; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests per SOP; adhered to 5S principles; ensured on-time delivery and high-quality output; generated First Article Inspection Reports; conducted visual and measurement tests; accepted/rejected products and recommended process adjustments.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and visually inspected components to drawings using various equipment; reviewed certificates of conformity; ensured calibration and proper use of testing instrumentation; contributed to quality documentation and supplier communications.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Ensured ISO 9001 compliance; managed quality KPIs (PPM, supplier/customer quality, on-time delivery, cost of quality); led quality projects from concept to completion, including PPAP level 3, supplier development, and customer audits.
Supplier Quality Engineer at Doncasters Precision Castings Deritend – Droitwich, UK
January 1, 2025 - October 25, 2025Led supplier quality activities to minimize disruptions; conducted supplier non-conformances and RCA (8D); maintained supplier scorecards; supported PPAP and new supplier approvals; ensured ISO9001 and AS9100 compliance and collaboration with customers.
Process Quality Engineer at Vanguard Foundry – Stourbridge, UK
May 1, 2025 - October 25, 2025Generated, controlled and reviewed quality data; led RCA teams using 5 whys, 8D and corrective actions; managed internal/external rejects and scrap reviews; produced quality documents and supported audits and process improvements.
Quality Engineer at Mettis Aerospace – Redditch, UK
May 1, 2025 - PresentParticipated in SQCDP meetings; reduced process variability and supported NPI; ensured AS9100 compliance and that forged, machined and assemblies meet strict quality standards; supported PPAP submissions (FMEA, PFMEA, Control Plan, ISIR, etc.) and trained staff.
Interviewer / Project Coordinator at Centre of Sociological, Politological and Psychological Analysis and Investigations CIVIS
October 1, 2009 - October 25, 2025Conducted face-to-face and focus group interviews across high-profile political, social and economic surveys.
Market Researcher at Institute of Marketing and Polls. IMAS -INC
December 1, 2013 - October 25, 2025Collected ideas, opinions, consumer behaviour, likes/dislikes, perceptions and attitudes on market research subjects.
Engineer at Wine Factory “Stauceni” - NCPP
October 1, 2014 - October 25, 2025Researched new products and ways of working; monitored and improved processes; production planning and control; reduced variability by maintaining up-to-date standard work methods and work instructions; developed solutions to production problems; ensured sustainability of tools and equipment.
Quality Inspector at Grupo Antolin (Magna) – Droitwich, UK
May 1, 2018 - October 25, 2025Assembled components and performed electrical tests per SOPs; worked within 5S; supported team; achieved production targets; ensured health and safety compliance; completed First Article Inspection Reports; performed visual and measurement tests to confirm conformance; recommended process adjustments for quality improvements.
Quality/Mechanical Technician at Komatsu – Underground Mining Corporation (JOY GLOBAL)
November 1, 2022 - October 25, 2025Measured and visually inspected components against drawings using verniers, micrometers, microscopes, shadowgraphs, NDT methods; reviewed certificates of conformity; maintained control plans and documentation; ensured QMS compliance; identified root causes and implemented corrective actions; handled FAIRs with vendors; calibrated inspection gauges and utilized SAP QM modules.
Quality Manager at Quality Springs and Pressings
December 1, 2023 - October 25, 2025Managed ISO 9001 compliance, quality KPIs, and QMS; led quality projects from concept to completion (PPAP level 3); defined supplier and raw material requirements; performed monthly quality analyses (CCAR/SCAR/ICAR); led 8D investigations and cross-functional actions; conducted internal/external audits and supported customer audits.
Supplier Quality Engineer at Doncasters Precision Castings Deritend
January 1, 2025 - October 25, 2025Led supplier quality activities to ensure external parts meet customer requirements; conducted internal/external audits, handled supplier non-conformances, maintained supplier scorecards, managed NCRs through 8D, ensured compliance with ISO9001/AS9100; supported new supplier additions and PPAP requirements; provided technical quality support to production and customers.
Process Quality Engineer at Vanguard Foundry
May 1, 2025 - October 25, 2025Generated and controlled quality data; led RCA teams (5 Whys, 8D); managed internal/external rejects and scrap; produced quality documents (QAs, WIs, SOPs); maintained QMS data; conducted process audits; drove targeted improvements and controlled SOPs/OPLs; supported customer audits.
Quality Engineer at Mettis Aerospace
May 1, 2025 - PresentParticipated in daily SQCDP meetings; eradicated process variability; supported NPI; interfaced with stakeholders; managed MRB and scrap reductions; ensured AS9100 compliance; oversaw PPAP submissions and FMEAs; acted as quality contact for customers and led improvement actions; conducted audits and training; produced RFT and quality reports.
Education
Bachelor (Honours) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma in Project and Quality Management (Level 7) at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (Honors) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma in Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (honors) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (honors) degree at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Level 7 Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (honors) degree at Technical University of Moldova, Engineering and Management in Food Industry
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) London School of International Business Level 7 Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (Honors) degree at Technical University of Moldova, Engineering and Management in Food Industry
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma in Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (Honors) degree at Technical University of Moldova, Engineering and Management in Food Industry
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (honors) degree at Technical University of Moldova, Engineering and Management in Food Industry
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) at London School of International Business, Level 7 Diploma Project and Quality Management
January 1, 2019 - November 1, 2019Bachelor (Honors) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma in Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (honors) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (Honors) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Level 7 Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (Honors) degree in Engineering and Management in Food Industry at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Bachelor (honors) degree at Technical University of Moldova
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Level 7 Diploma Project and Quality Management at London School of International Business
January 1, 2019 - November 1, 2019Qualifications
NARIC UK Recognized Qualification (RQF Level 6 / SCQF Level 10 / CQFW Level 6)
January 11, 2030 - October 25, 2025NARIC UK Recognized Qualification: RQF Level 6 / SCQF Level 10 / CQFW Level 6
January 11, 2030 - October 25, 2025Level 7 Diploma in Project and Quality Management
January 1, 2019 - November 1, 2019NARIC UK Recognized Qualification: RQF Level 6 / SCQF Level 10 / CQFW Level 6
January 11, 2030 - October 25, 2025NARIC UK Recognized Qualification - RQF Level 6 / SCQF Level 10 / CQFW Level 6
September 1, 2010 - October 25, 2025Diploma - Project and Quality Management (Level 7)
January 1, 2019 - November 1, 2019NARIC UK Recognized Qualification: RQF Level 6 / SCQF Level 10 / CQFW Level 6
January 1, 2014 - October 25, 2025NARIC UK Recognized Qualification (RQF Level 6 / SCQF Level 10 / CQFW Level 6)
January 11, 2030 - October 25, 2025Level 7 Diploma in Project and Quality Management
January 1, 2019 - November 1, 2019Bachelor (Honors) in Engineering and Management in Food Industry
September 1, 2010 - June 1, 2014Diploma Level 7 - Project and Quality Management
January 1, 2019 - November 1, 2019Diploma Level 7 - Project and Quality Management (London School of International Business)
January 1, 2019 - November 1, 2019RQF Level 6 / SCQF Level 10 / CQFW Level 6 Recognized Qualification (NARIC UK)
January 11, 2030 - October 25, 2025Bachelor (Honors) degree in Engineering and Management in Food Industry
September 1, 2010 - June 1, 2014Master’s degree (Postgraduate) Level 7 Diploma Project and Quality Management
January 1, 2019 - November 1, 2019Recognized Qualification - NARIC UK Framework levels: RQF Level 6 / SCQF Level 10 / CQFW Level 6
January 11, 2030 - October 25, 2025Industry Experience
Manufacturing, Transportation & Logistics, Professional Services, Other, Wholesale & Distribution, Education
Experience Level
Expert
Expert
Intermediate
Intermediate
Intermediate
Intermediate
Hire a Designer
We have the best designer experts on Twine. Hire a designer today.